Plot points based on x axis value

Support questions for Flow CSV Viewer and Editor.
Post Reply
dbeg
Posts: 2
Joined: Thu Nov 04, 2021 2:30 pm

Plot points based on x axis value

Post by dbeg »

Hi,

is it possible to plot points on x unequaly, based on its actual value.
Background is csv that i have is log file of data, which is logged on signal change, at each signal change also timestamp is logged.
I would like to plot csv so that distance between points on x axis would be based on timestamp.

For example I have csv as below, where timestamp Time is unequal.
Time;Value
1; 1
10; 2
100; 3

Best regards, Dejan
Waveworks
Posts: 67
Joined: Thu Sep 05, 2019 1:05 pm

Re: Plot points based on x axis value

Post by Waveworks »

Hello Dejan! This is unfortunately not yet possible, but it's by far the most requested feature. If you check the Feedback board here in the forum and read the "timestamps, scatter plots" thread, you will see several users asking for the same thing.

I have noted yet another request for this feature and hope to be able to release it in a not too distant future!

Best regards,
Gustaf
dbeg
Posts: 2
Joined: Thu Nov 04, 2021 2:30 pm

Re: Plot points based on x axis value

Post by dbeg »

Hi Gustaf,

thanks for feedback, I was not aware of that.
Newertheless, the ploting tool is really good!

Best regards, Dejan
Waveworks
Posts: 67
Joined: Thu Sep 05, 2019 1:05 pm

Re: Plot points based on x axis value

Post by Waveworks »

Thank you, glad you find it useful!

Best regards
Gustaf
Post Reply